Services
We provide a cross-section of services based in the three main tranches below. However, we also have a significant number of smaller clients who use our services in the North East of England.
Specialist DSEAR Consultant | Fire Engineer
I provide high-level technical consultancy for complex hazardous environments. I specialise in the intersection of traditional industrial fire safety and the emerging challenges of Grid-Scale Battery Energy Storage Systems (BESS).
​​
Core Expertise:
Beyond the Standard Assessment
-
While many offer basic risk assessments, I provide deep-technical compliance throughout the entire lifecycle of a project:
-
Pre-DSEAR Design Reports: Identifying and mitigating explosive risks during the design phase to ensure safe, compliant plant layouts before construction begins.
-
DSEAR Reviews & Audits: Comprehensive evaluations of existing operations to ensure ongoing compliance with the Dangerous Substances and Explosive Atmospheres Regulations.
-
Explosion Protection Documents (EPD): Expert drafting of technical documentation for global manufacturers, ensuring rigorous safety standards are met for high-risk equipment.
-
BESS Specialist: Leading-edge DSEAR assessments and fire strategies for grid-scale battery storage, managing the unique risks of thermal runaway and off-gassing.
​
Strategic Safety Documentation
I deliver the critical framework required for the HSE and Fire Authorities to approve high-hazard sites:
-
Full Fire Strategies tailored to industrial and commercial requirements.
-
Emergency Response Plans that are practical, engineered solutions—not just "off-the-shelf" templates.
-
Battery Safety Management Plans that provide insight for first responders on how to deal with
Diverse Sector Experience
My portfolio spans some of the UK’s most sensitive and logistically challenging environments:
-
Critical Infrastructure: HM Prisons and Government facilities.
-
Logistics & Retail: National Distribution Centres and large-scale warehousing.
-
Public & Heritage: museum laboratories utilising flammable and explosive substances
-
Energy & Manufacturing: Grid-scale BESS sites and complex industrial plants.
​
Professional Credentials
Under the Dangerous Substances and Explosive Atmospheres Regulations 2002 (DSEAR), competency for an assessor is not defined by a specific qualification because no single license or internationally recognised body certifies this role. Instead, the Health and Safety Executive (HSE)requires a "competent person," which is defined by a combination of practical factors rather than just academic
However, the nearest thing to a qualification for DSEAR is the four-day IFE Accredited Specialist DSEAR Certificate provided by DEKRA which I have.
Other example credentials include:
-
NVQ Level 5 in Fire Risk Assessment
-
NEBOSH Fire Safety & Risk Management
-
NEBOSH National General Certificate
-
Member: Institute of Fire Safety Managers (IFSM)
-
Institute of Fire Protection Officers
-
Institute of Fire Engineers
-
Member: The Institution of Engineering and Technology (MIET)
Consulting Engineer | Temporary Works Specialist
With over four decades of experience in complex engineering environments, I provide senior-level consultancy across high-risk, high-value projects, supporting clients in resolving technically demanding challenges with practical, engineered solutions.
​​
My background spans heavy industry, energy, infrastructure, and emerging technologies, combining hands-on operational knowledge with strategic advisory capability.
Core Engineering Consultancy Expertise​
-
Engineering Problem Solving at Scale
-
I work as part of client-side teams to investigate and resolve complex engineering issues, providing:
-
Root cause analysis of failures and defects
-
Practical, buildable engineering solutions
-
Independent technical assurance for high-value assets
​
Recent work includes consultancy support to one of the world’s largest battery energy storage system developers, contributing to inspection regimes and engineering investigations across grid-scale projects.
​​
Energy from Waste & Heavy Industry​. I currently provide consultancy services to one of the world’s largest recycling organisations, supporting Energy from Waste (EfW) power station operations.
​​
This includes
-
Inspection and assessment of operational plant
-
Engineering input into maintenance and reliability challenges
-
Supporting safe and efficient operation of complex thermal processes
​
These environments demand a deep understanding of:
-
High-temperature systems
-
Combustion processes
-
Integrated mechanical and electrical plant
​
Temporary Works Engineering & Coordination
​As a qualified Temporary Works Coordinator, I provide both coordination and technical consultancy across major projects.
My services include:
-
Temporary works design review and approval
-
Engineering calculations and structural solutions
-
Risk management for complex temporary systems
-
On-site coordination ensuring safe implementation
​
My consultancy experience extends into some of the most demanding sectors, including:
-
Nuclear power generation – temporary works and engineering assurance
-
Battery Energy Storage Systems (BESS) – inspection, defect analysis, and engineering support
-
Energy from Waste plants – operational and maintenance engineering
-
Major industrial and infrastructure projects – temporary works and construction engineering
​
​These environments require:
-
Absolute adherence to safety and compliance
-
Robust engineering judgement
-
The ability to operate effectively within multidisciplinary teams
Approach: Practical Engineering, Not Theory
​​
-
My work is grounded in a simple principle:
-
Engineering solutions must be practical, buildable, and safe in real-world conditions.
​
I bring:
-
Extensive site experience
-
Strong understanding of construction and operational constraints
-
The ability to bridge design intent with on-site reality
Professional Capability​
-
40+ years in engineering and senior roles
-
Qualified Temporary Works Coordinator
-
Extensive experience in high-hazard industries
-
Trusted advisor to major organisations in energy, recycling, and infrastructure
Producing High-Integrity Technical Reports for Complex, High-Risk Projects
I specialise in the production of clear, defensible, and regulator-ready technical documentation, supporting projects from early planning through to construction and operation.
With over 40 years of engineering experience, my reports are not just theoretical—they are grounded in real-world application, constructability, and regulatory expectations, ensuring they stand up to scrutiny from authorities, insurers, and stakeholders.
Core Technical Documentation Expertise
Fire & Explosion Engineering Reports
I produce detailed, engineering-led documentation to support fire and explosion risk management, including:
• Fire Strategies for industrial, commercial, and high-hazard sites
• Intrusive Fire Surveys to assess real-world conditions within existing buildings
• Smoke Plume Analysis to model fire development and environmental impact
• Battery Safety Management Plans for grid-scale energy storage systems
These reports are developed to align with regulatory expectations and operational realities, ensuring they are both compliant and actionable.
Emergency & Risk Planning
I develop practical, site-specific emergency planning documentation, including:
• Emergency Response Plans tailored to complex industrial risks
• Scenario-based planning for fire, explosion, and environmental incidents
• Integration with site operations and first responder requirements
The focus is always on:
• Real-world usability
• Clear decision-making frameworks
• Effective incident mitigation
Planning & Regulatory Support Documentation
I provide specialist technical reports to help clients overcome planning and regulatory challenges, particularly where standard approaches fall short.
This includes:
• Technical justifications for non-standard fire strategies
• Solutions for fire water supply limitations
• Fire water containment and contaminated runoff (firewater waste) management
• Supporting documentation for complex or novel technologies
These reports are often critical in:
• Securing planning approval
• Satisfying fire authorities and environmental regulators
• Unlocking stalled or high-risk developments
Construction Phase Safety Documentation
I produce comprehensive documentation to support safe and compliant project delivery, including:
• Pre-Construction Information (PCI)
• Construction Phase Plans (CPP)
• Risk Assessments and Method Statements (RAMS)
• Construction Traffic Management Plans
• Environmental Management Plans
• Waste Management Procedures
All documentation is tailored to:
• The specific risks of the project
• Contractor interface
• Regulatory requirements under CDM
Environmental & Waste Management Systems
I develop specialist documentation for environmental protection and waste control, particularly in complex industrial settings.
This includes:
• Lagoon management documentation in line with CIRIA C736
• Design and documentation of leachate management systems
• Development of new approaches for industrial composting runoff control
• Site-specific waste handling and containment strategies
My work focuses on:
• Preventing environmental contamination
• Ensuring regulatory compliance
• Delivering practical, maintainable systems
Approach: Reports That Work in Practice
Technical documentation is only valuable if it can be:
• Understood
• Implemented
• Defended
My approach ensures every document is:
• Technically robust
• Regulator-ready
• Grounded in site reality
Value to Clients
I support clients by:
• Turning complex engineering challenges into clear, approvable documentation
• Bridging gaps between design, construction, and operation
• Providing reports that withstand scrutiny from:
• Regulators
• Fire authorities
• Environmental agencies
• Insurers
Proud to be associated with:
.jpg)
.jpg)
Client Testimonials
Mick has conducted many Legionella, Health & Safety and Fire Risk Assessments, on our behalf. He is conscientious, competent and extremely helpful and reliable. He is an asset to any Company.
Head of Operations, The Health & Safety Risk Assessment Company
​
​SUEZ R&R engaged with Michael Carr, to carry out surveys of our national network of power stations, the scope of works was to inspect our infrastructure condition from a civil engineering perspective & to assess the safety of our stockpile management.. Mick fulfilled and exceeded our expectations, he is professional, friendly and developed a comprehensive report, complete with action plans and follow up consultations to ensure site were bought back to compliance, we continue to engage with Mick for continued works, as he is a clear asset to our business.
Contracts Manager, SUEZ Recycling & Recovery Ltd
​
Mick has been working alongside Pearl Safety Solutions for a number of years now on various different projects, providing us with a wealth of experience and insight from his numerous years working throughout the engineering & health and safety industries. Mick’s experience with not only operational tasks, but also technical ability have been of huge benefit to our business. We would be glad to recommend his services to any potential clients looking to engage with him.
Luke Jones, Director, Pearl Safety Solutions Ltd.​
​
Mick has continued to provide all our H&S needs from setting up our policy and procedures, to providing risk assessments and temporary works advice on our projects. His thorough approach let's me get on with the core business in full knowledge everything on the H&S front is compliant and our site guys are working safely.
Managing Director, Fox Construction Ltd
​
​On asking the Senior VP of Samsung Construction & Technology if he could vouch for me, his response was:
"I will assure anyone asking that they will expect you to walk on water based on my input".
​- What more could I ask???
​
I worked closely with Mike whilst he was employed within my training company and whilst there, he was able to utilise his skills of writing successful tenders. Mike’s passion and attention to detail along with the approach he took to gathering the necessary information from the team was brilliant. Mike produced an effective, concise and compelling tender that had a very tight deadline attached to it. Not only were we successful but we also received the highest score out of all the other tenders submitted. I would have absolutely no hesitation in recommending Mike.
CEO Training Company
​
Contact Us
MCC Engineering & Technical Services Ltd
Felton, Northumberland
07773574297
